Sand Making Machine

Type:Sand Making Machine
Power(W):180 kW
Capacity(t/h):100-130 tph
Dimension(L*W*H):4140x2280x2425
Weight:14.5 t
Max feeding Size (Soft Material):40 mm
Max. Feeding Size (Hard Material):35 mm
Capacity (Feed at Center):100-130 tph
Capacity (Feed at Center & Sides):200-260 tph

Sand Making Machine is suitable for the medium and fine crushing of various hard and crisp materials such as various rocks, abrasive materials, refractory, cement clinker, quartz stone, iron ore and concrete aggregate, and especially suitable for making building sand and road paving sand and stone.

Working Principle

The materials go into the crusher from the feed hopper and are separated into two parts by the distributor. One part goes into the impeller rotating with high speed from the middle of the distributor, and is quickened inside the impeller, and the acceleration can reach hundred times of the acceleration of gravity, and then the materials will cast from the three uniformly distributed runners of the impeller at a speed of 60-70m/s, and impact and crush with the other part of materials which fall from around the distributor and then they will together impact to the material lining inside the vortex cavity. Bounced from the material lining, the materials will impact obliquely upward to the top of the whirling motion chamber which will change their movement direction again, so that materials will move down, and the materials launching from the runners of the impeller will form a continuous material curtain. In this way, the materials will get two times or more hitting, friction, grinding and crushing effect inside the whirling motion crushing chamber. The crushed materials will be discharged from the bottom discharging mouth. This process will form a closed-circuit system together with the cyclic screening system and generally speaking, after three times of cycle, the materials will be crushed below 20Moh.

Technical Data

Model

HYVSI-7611

HYVSI-8518

HYVSI-9526

Handling Capacity (tph)

Feed at Center & Rim

120-180

200-260

300-380

Feed at Center

60-90

100-130

150-190

Max. Feeding Size

(mm)

Soft material

35

40

45

Hard material

30

35

40

Rotating Speed (r/min)

1700-1890

1520-1690

1360-1510

Double-motor Power (kW)

110

180

264

Overall size (L×W×H)(mm)

3700×2150×2100

4140×2280×2425

4560×2447×2778

Weight (t)

11.8

14.5

17.8

Voltage

380V 50HZ or Customized

Request for Quotation

Please leave your information to get the latest quotation and product catalogue!